KS1000 FF
52.00 € per 1 m2
Kroki zamawiania:
- Wybierz kolor panelu, który chcesz zamówić.
- Jeśli chcesz wybrać inny kolor tego samego produktu, dodaj wybrany produkt do koszyka i rozpocznij nową konfigurację dla nowego koloru.
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
The roof panel KS1000 FF with trapezoidal external face profile is an exposed fastening panel with mineral wool insulated core K-Roc®. It can be used in all building types where the roof pitch is:
• greater than 5° (8.5%) – for roofing made of a single panel installed along the pitch,
• greater than 8° (14%) – for roofing made of multiple panels installed along the pitch.
The standard external coating is polyester (PES), and the internal layer is polyester (PEI). Other optional coatings are available in the data sheet.
Additional information
- Dimensions and weight
- Colours
- Embossing
- Quality and warranty
- Download
d – core thickness [mm] |
60 |
80 |
100 |
120 |
150 |
175 |
200 |
D – total thickness [mm] |
94 |
114 |
134 |
154 |
184 |
209 |
234 |
Weight [kg/m²] |
17,79 |
20,19 |
21,59 |
23,79 |
27,09 |
31,59 |
34,59 |
Available thickness range
The standard panel length is two to ten metres. They can be cut shorter on site. Please contact our Customer Service regarding production and delivery of other lengths. The maximum available length of the panel is 13 m.
- Cut back – factory-made (the core and bottom face removed)
- If the design provides for panel joining along the pitch, the panels are overlapped using the cut back.
The panels KS1000 FF have no cut back as standard. If at least two roof panels have to be installed along the pitch due to the length of the roof, they need to overlap. Factory-made cut back for overlap (core and bottom face removed) can be made for panels three to ten metres long. The cut back is 50 to 300 mm long.
Specify the cut back length and panel handedness in the order in relation to placement on the roof.
For a standard arrangement (cut back facing the observer), the left-handed panel has the free longitudinal corrugation on the left-hand side. The panels are then installed from left to right (recommended installation direction opposite to the prevailing wind).
Standard Kingspan Colours – Folder
B (Box) – internal profile
Quality
Kingspan insulation composite panels are made of top quality materials using the latest manufacturing technologies. They conform to strict quality control requirements and ISO 9001:2015 standards. Durability and reliability guaranteed.
Building regulations
Kingspan insulated composite panels KS1000 FF are manufactured in accordance with applicable building regulations and standards. They conform to the harmonised European standard PN EN 14509: Self-supporting double skin metal faced insulating panels – Factory made products – Specifications.
Warranty
Kingspan provides statutory warranty and warranty for external coatings and composite panels for each project separately.
Disclaimer
Although we publish information provided by Kingspan on its websites assuming they are accurate, complete, and true, you should not make your decision in particular circumstances based on them. Any advice, opinions, information, or other content are published on the websites with the proviso that Kingspan, its employees, and authors of the websites are not liable for any damage resulting from the use of the information from the websites.
Acts of law, regulations, standards, ordinances, certificates, reports, and other legal documents are subject to change. Should you need additional and valid information, do not hesitate to contact Kingspan’s technical department.
Complaints
You may also like…
-
Snow guard Z12 (25 pieces)
365.70 €Snow guard compatible with insulated panels KS1000 RW, KS1000 FF or KS1000 RT to prevent snow from slipping off the roof and to protect the roof against damage
-
-
Snow guard Z14 – SnowKingZ14
42.80 € per 1 lmSnow guard compatible with insulated panels KS1000 RW to prevent snow from slipping off the roof and to protect the roof against damage
-
-