KS1150 TF (PIR IPN)
46.30 € per 1 m2
Kroki zamawiania:
- Wybierz kolor panelu, który chcesz zamówić.
- Jeśli chcesz wybrać inny kolor tego samego produktu, dodaj wybrany produkt do koszyka i rozpocznij nową konfigurację dla nowego koloru.
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
Panel KS1150 TF is an exposed-fastener system used for cladding providing protection from heat or cold. The panels can be installed horizontally or vertically and come with various coatings so they can make every building look good. Vertical or horizontal panel installation. The panels are suitable for all building types, including cold and freezer facilities. The standard external coating is polyester (PES), and the internal layer is polyester (PEI). Other optional coatings are available in the data sheet.
Additional information
- Dimensions and weight
- Colours
- Embossing
- Quality and warranty
- Download
- KS1150 TF are composite cladding panels with exposed fasteners
- are intended for external and internal walls, but also ceilings
- the panels can be installed on ceilings as well
| d – insulating core thickness [mm] | 40 | 50 | 60 | 80 |
| Density [kg/m²] | 10,09 | 10,49 | 10,89 | 11,69 |
Available thickness range
The standard panel length is three to twelve metres. They can be cut shorter on site. Please contact our Customer Service regarding longer panels.
Standard Kingspan Colours – Folder
Q (minibox) – external profile
M (micro) – external profile
Q (minibox) – internal profile
D (deep) – internal profile
Quality
Kingspan insulation composite panels are made of top quality materials using the latest manufacturing technologies. They conform to strict quality control requirements and ISO 9001:2015 standards. Durability and reliability guaranteed.
Building regulations
Kingspan insulated composite panels are manufactured in accordance with applicable building regulations and standards and conform to the requirements in the harmonised European standard PN EN 14509: Self-supporting double skin metal faced insulating panels – Factory made products – Specifications.
Warranty
Kingspan’s warranty is granted for each project separately, taking into consideration the environmental corrosiveness and the selected coating type.
Disclaimer
Although we publish information provided by Kingspan on its websites assuming they are accurate, complete, and true, you should not make your decision in particular circumstances based on them. Any advice, opinions, information, or other content are published on the websites with the proviso that Kingspan, its employees, and authors of the websites are not liable for any damage resulting from the use of the information from the websites.
Acts of law, regulations, standards, ordinances, certificates, reports, and other legal documents are subject to change. Should you need additional and valid information, do not hesitate to contact Kingspan’s technical department.
Standard packaging for road transport
The Kingspan panels are placed on EPS blocks or wooden pallets. The sides are protected with EPS foam boards. The package is wrapped in polyethylene.
The number of panels in a package depends on their thickness, see the table below. The number of panels in packages that are longer than the longest standard panels is reduced proportionally. The standard pallet height is 1,100 mm. The maximum pallet weight is 3,000 kg.
| Insulated core thickness (mm) |
40 | 50 | 60 | 80 |
|---|---|---|---|---|
| Panels in package | 26 | 22 | 18 | 13 |
