QuadCore® KS1000 X-Dek™ XM
74.40 € per 1 m2
Kroki zamawiania:
- Wybierz kolor panelu, który chcesz zamówić.
- Jeśli chcesz wybrać inny kolor tego samego produktu, dodaj wybrany produkt do koszyka i rozpocznij nową konfigurację dla nowego koloru.
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
High-quality panel system KS1000 X-dek (QuadCore®) for flat roofs with trapezoidal profile is intended for all building types where the roof pitch is not lower than 0.5°. The standard external coating is PVC membrane (1.2 mm), and the internal layer is polyester (PEI). Other optional coatings are available in the data sheet.
Additional information
- Dimensions and weight
- Materials
- Kvaliteet ja garantii
- Download
Panel weight
| Core thickness – d [mm] | Metal sheet thickness [mm] |
Total thickness – D [mm] | Panel weight
[kg/m²] |
|||
|---|---|---|---|---|---|---|
| type XD | type XM | type XB | type XG | |||
| 80 | 0,9 | 188 | 20,52 | 16,13 | 14,88 | 14,78 |
| 1,1 | 22,80 | 18,43 | 17,22 | 17,12 | ||
| 100 | 0,9 | 208 | 21,46 | 16,85 | 15,56 | 15,46 |
| 1,1 | 23,74 | 19,15 | 17,90 | 17,80 | ||
| 140 | 0,9 | 248 | 22,92 | 18,29 | 16,92 | 16,82 |
| 1,1 | 25,21 | 20,59 | 19,26 | 19,16 | ||
Available thickness range
The standard panel length is 3.0 to 13.5 m. They can be cut shorter on site. The maximum available custom length is 15 m (oversize cargo transport to the site). Please contact our Customer Service regarding longer panels.
Cut back
All X-dek panels have a factory-made cut back in the internal trapezoid sheet. The standard cut back length is 50 mm; the maximum length is 630 mm.
Always specify the cut back side in relation to roof placement when placing an order.
External shell
Galvanised steel sheet, class S350GD + Z180 or S350 + Z275 on request. Substrate for protective coats type: Substrate for protective coats type polyester, PVDF Spectrum™. The standard steel thickness is 0.9 mm, 1.1 mm on request.
External shell variants by panel type KS1000 X-DEK™
XD – 0.7 mm galvanised sheet steel, minimum class S220GD + Z275 profiled (minibox).
XM – waterproof PVC film, standard thickness 1.2 or 1.5 mm on a textile substrate. Standard light grey colour.
XG – TR27 glass fibre substrate for PVC or EPDM roofing (fastened to internal sheet or glued over the entire surface)
Insulated core
Rigid IPN closed-cell foam insulated core. The insulating foam is safe, has a zero ozone depletion potential, and contains no CFC/HCFC (hard or soft freons).
Sealing
The long joint is factory sealed. All joints have factory-applied PE foam condensation tape.
During installation, apply butyl sealing tape to the free long corrugation and a vapour barrier seal to the cut back on the transverse joint.
Kvaliteet
Meie soojustatud katuse- ja seinasüsteemidega tagate oma klientidele suurepärase Kingspani kvaliteedi. Sellest tulenevalt garanteerime, et
kasutame ainult tippkvaliteediga alusmaterjale ning rakendame pidevat kvaliteedikontrolli ja uusimaid tootmistehnikaid. Kõik Kingspani katuse- ja seinasüsteemid vastavad standardi ISO 9001:2008 nõuetele.
Garantii
Orgaanilise kattega välimise teraspleki puhul pakume projektipõhist garantiid. Siin veebisaidil esitatud andmed ja omadused on garanteeritud vaid juhul, kui me seda iga tellimuse puhul sõnaselgelt kinnitame. Säilitame õiguse teha muudatusi tehnilistes andmetes.
Kingspan – Products
</span >Kingspan Roof Panel KS1000 X-dek XM (IPN) – Datasheet [EN]
Kingspan Wall & Roof Panels Load Span Tables [EN]
