QuadCore® KS1000 TL
54.20 € per 1 m2
Kroki zamawiania:
- Wybierz kolor panelu, który chcesz zamówić.
- Jeśli chcesz wybrać inny kolor tego samego produktu, dodaj wybrany produkt do koszyka i rozpocznij nową konfigurację dla nowego koloru.
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
- Istnieją ograniczenia długości produktu, o których należy pamiętać. Jeśli potrzebujesz pomocy na dowolnym etapie, daj nam znać!
Thanks to horizontal and vertical orientation combined with very good insulating properties, the panel KS1000 TL is perfect for cold and freezing facilities.
It has an innovative hybrid core QuadCore® with the lowest thermal conductivity of 0.018 W/mK available on the market.
The standard external coating is polyester (PES), and the internal layer is polyester (PEI). Other optional coatings are available in the data sheet.
Additional information
- Dimensions and weight
- Colours
- Embossing
- Warranty and shipping
- Download
KS1000 TL are composite wall and ceiling panels with exposed fasteners. They are intended for cold stores, freezers, and partitions. The panels can also be used for any special application where top tightness and thermal insulation are required.
Available thickness range
The standard panel length is from 2.7 to 12.0 metres (max. 15 m). Panels shorter than 2.7 m are cut on site. Please contact our Customer Service regarding longer panels.
Standard Kingspan Colours – Folder
Q (minibox) – external profile
M (micro) – external profile
Q (minibox) – internal profile
D (deep) – internal profile
Unloading
The receiving party shall ensure adequate unloading in line with transport and unloading guidelines on packages. The carrier specifies the unloading method in the delivery document.
Always follow storage and handling guidelines when moving panel packages for each package.
To ensure safe unloading of packages, use adequate safety mechanisms and precautions such as cargo planks, straps, etc.
Storage
Prevent water accumulation between panels, excess loading, and direct sunlight, rain, and dust impact during storage.
Panel installation
You can request panel installation procedures and advice from our Technical Department at tech@kingspan.pl, where you can arrange for an expert training for installers.
Details of unloading, storage, handling, and installation of our panels can be found in the Technical Catalogue and are available from our Technical Department.
Standard packaging for road transport
The panels are placed on polystyrene blocks or wooden pallets. The sides are protected with polystyrene boards. The package is wrapped in polyethylene. The number of panels in a package depends on their thickness, see the table below. The number of panels in packages that are longer than the longest standard panels is reduced proportionally. The standard pallet height is 1,100 mm. The maximum pallet weight is 3,000 kg.
| Panel insulated core thickness (mm) |
100 |
120 |
150 |
170 |
180 |
200 |
|---|---|---|---|---|---|---|
| Panels in package |
11 |
9 |
7 |
6 |
6 |
5 |
